Metra Electronics Door Access Terminal Combo Manual de usuario descargar pdf (Pagina 11)

Page 11

Door Access Terminal Combo User Manual

STEP 2: When the MASTER card is recognized, “OK” optical

signal lights up and short acoustic signal is activated.

The door is unlocked.

STEP 3: Do not remove the MASTER card from the

antenna field until additional two short acoustic signals are

activated (approximately 4 seconds after first single

acoustic signal is activated).

The door remains unlocked (latched) and “OK” optical

signal remains on.

Remove the MASTER card form the antenna filed.

 NOTE 

Repeat the procedure to deactivate (unlatch) the door lock. “OK” optical signal is also deactivated.

 Alarm signalization

When Alarm is triggered the interrupted acoustic signal

and “NO” optical signal are activated.

Alarm is triggered by following actions:

 Door brake-in is detected.

 Door is opened longer than X seconds, while X is set in the operating parameters.

NOTE: For both, the door must be equipped with the tamper sensor and alarm must be enabled in

device’s operating parameters.

Consult Door Access Terminal Technical Manual for details.

1 2 ... 6 7 8 9 10 11

Sin comentarios

Metra Electronics Door Access Terminal Combo Manual de usuario Pagina 11